Jensen Interceptor MKIII LED Bulb Upgrade Kits

£50.00

Having worked closely on a number of MKIII Interceptors and fitted these kits, we have produced simple kits to upgrade all the standard fit bulbs for your car. The hyperlinks below will take you to the individual recommended products should you wish to part upgrade. The kits comprise of:

Fitting	Lucas Reference	Colour Options	No Req'd
Headlight Bulbs
Main and Dipped Outer	H4 or H1	White, Warm White	2
Main Inner	H1	White, Warm White	2

Exterior Bulbs
Sidelights	989	White, Warm White	2
Indicators	382	Amber	4
Indicator Flasher Relay	2 pin	N/A	1
Hazard Flasher Relay	2 pin	N/A	1
Side Flasher - Later Fit Only (wide Lens)	989	Amber	2
Stop Tail	380	Red	2
Number Plate	207	White, Warm White	2
Reversing Light	382	White, Warm White	2

Interior Bulbs
Boot Light	42mm	White, Warm White	1
Engine Bay Light	42mm	White, Warm White	1
Engine Inspection	989	White, Warm White	1
Interior Door Pillar Lamps	38mm	White, Warm White	2
Panel Illumination (above switches)	987	White, Warm White, Blue, Green	2
Indicator Warning Lights	281	Green	2
Clock	281	White, Warm White, Blue, Green	1
Instrument Panel 52mm Gauges	987	White, Warm White, Blue, Green	4
Speedometer	987	White, Warm White, Blue, Green	1
Main Beam Warning	987	Blue	1
Rev Counter	987	White, Warm White, Blue, Green	1
Gear Quadrant	501	White, Warm White, Blue, Green	2
Seat Belt Warning	987	White, Warm White, Blue, Green	2
Temperature and Fan Selector Illumination	987	White, Warm White, Blue, Green	2
Cigar Lighter	989	White, Warm White, Blue, Green, Red	1
Door Warning Light	989	Red	2
Glove Box Interior	987	White, Warm White, Blue, Green	1
Steering Lock Illumination	281	White, Warm White, Blue, Green, Red	1
Brake Warning Light and Test Switch		Not recommended to replace
Alternator Warning		Not recommended to replace

When ordering, please make it clear in the notes at checkout which colours you need where options are given or send us an email to sales@classiccarleds.co.uk with the details.

THE LEDS SUPPLIED WILL BE STANDARD REPLACEMENT FITTINGS AS FITTED BY THE FACTORY. IF YOU HAVE NEWER UPGRADED FITTINGS SUCH AS T10 INSTEAD OF THE E10MES SCREW PLEASE LET US KNOW WHICH YOU NEED.

A fitting hints and tips sheet will be sent with any order to assist with fitting any bulbs that are not obvious to get to. All LEDs will be supplied and marked as to where they fit to avoid any confusion.

If you need anything changed on this list, please call us on 0800 246 5678 or send us an email to sales@classiccarleds.co.uk and we will be pleased to help.

Headlight bulbs have H4 or H1 for outer and H1 fitting for inner. Please check the fittings that your current headlamp units will accept them. If they are sealed beam units, you will need to upgrade them.

All prices shown exclude UK VAT which will be added at checkout together with postage where appropriate.

Generic Part Number: JENINTKIT